5
Operations for the SCR system
5.4
POINT
PERIOD
1
up to 2 months
Start-up after 2
1a
months
2
up to 9 months
Start-up after 9
2a
months
3
over 9 months
Start-up after
3a
9+ months
EN
46
INFORMATION ABOUT MAINTENANCE
OPERATION
•
Perform the operations described in point 1 of Tab. 5.3
•
Fill the AdBlue® tank with AdBlue® to the MAX level
•
The ambient temperature must be kept between -40 and 40 °C
•
Do not disconnect any electrical or hydraulic connections
•
Before starting the engine, check Para. 5.2 for maintenance
operations.
•
Consult the machine's manual to connect the battery and start the
engine.
•
Perform the operations described in point 2 in Tab. 5.3
•
Fill the AdBlue® tank with AdBlue® to the MAX level
•
The ambient temperature must be kept between -40 and 25 °C
•
Do not disconnect any electrical or hydraulic connections
•
Before starting the engine, check Para. 5.2 for maintenance
operations.
•
Consult the machine's manual to connect the battery and start the
engine.
•
Perform the operations described in point 3 of Tab. 5.3
•
Fill the AdBlue® tank with AdBlue® to the MAX level
•
The ambient temperature must be kept between -40 and 25 °C
•
Do not disconnect any electrical or hydraulic connections
•
Before starting the vehicle, proceed as follows:
•
Replace the AdBlue® in the tank (consult the machine's manual)
•
Replace the AdBlue® filter (Par. 6.5)
•
Check Par. 5.2 for maintenance frequency.
•
Consult the machine's manual to connect the battery.
•
Start the engine. If faults are detected when starting the engine or
during operation, turn off the engine and wait 5 mins before starting
the engine.
•
If the fault persists, contact KOHLER authorised workshops.