Table of Contents
Advertisement
6
6.2 Oil filter cartridge replacement
Important
• Before proceeding with operation, read
Warning:
•
Oil filter cartridge replacement (Par. 6.2) and fuel filter replacement (
•
In case of low use replace it 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to
Important:
•
Electric/pneumatic screwdrivers are forbidden
1. Unscrew cartridge holder cover A by performing three
complete turns and wait 1 minute.
NOTE: This operation allows to oil contained in the support
F to flow into the oil sump in the correct way.
2. Unscrew cartridge holder cover A and check that the
oil in the lub. oil filter support F has flowed towards the
oil sump.
3. Remove the cap A as well as the oil cartridge B from
the oil filter support.
4. Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new
ones.
5. Fit and tighten the cover A on the oil filter support F,
tightening it with a torque wrench G (tightening torque
of 25 Nm).
NOTE: Click on the icon to play the procedure.
EN
48
INFORMATION ABOUT REPLACEMENTS
Par. 3.2.2
Par. 6.6 DISPOSAL and SCRAPPING
6.4
6.5
6.6
https://www.youtube.com/embed/
eTL3NSUrZHQ?rel=0?rel=0
Par. 6.3
).
.
Advertisement
Table of Contents
