Add Modbus Devices (When Using Modbus Tcp) - Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual

3. Add Modbus Devices (When using Modbus TCP)

 Add Ethernet Adapter
1
Right-click on the controller of the device window and select [Add Device].
2
In the dialog box, select [Fieldbuses - Ethernet Adapter - Ethernet] and click [Add Device]
button.
 Add Modbus Master/Slave device
1
Right-click on the [Ethernet] on the device window and click [Add Device].
2
Add [Fieldbuses - Modbus - Modbus TCP Master - Modbus TCP Master] in the [Add Device]
dialog box.
3
Again, right-click on the [Modbus TCP Master] and select [Add Device].
Then add [Fieldbuses - Modbus - Modbus TCP Slave - Modbus TCP Slave].
—
Programing with CODESYS
CPSN-PCB271-S1-041 Reference Manual (Software)
— 85 —
—