Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual page 131

— —
Programing with CODESYS
CPSN-PCB271-S1-041 Reference Manual (Software)
 Count Value Setting Flow
The flow below illustrates the procedure of setting a count value.
Set a value in the counter setting register first. Then change the bit in the counter setting flag register
from 0 to 1. When setting the same value, it can be done by simply setting in the counter setting flag
register.
This bit is checked per cycle, Therefore, the values need to be held at least for the period of one cycle.
— 131 —