Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual page 143

*1 RS-232C serial port
Item
Baud rate *2
Data bits *2
Parity *2
Stop bits *2
Flow control
Transmit / receive FIFO size *3 Each 16 bytes
*2 The values that can be set depend on the specification of the CODESYS.
*3 If the connected device transmits data exceeding the FIFO size, the data may be lost.
*4 I/O module of the RS-422A/485 serial communication is supported with the firmware Ver1.10 or later version.
*5 Supported with the firmware Ver1.20 or later versions.
*6 Supported with the firmware Ver1.30 or later versions.
—
Appendix
CPSN-PCB271-S1-041 Reference Manual (Software)
Contents
300, 600, 1200, 2400, 4800, 9600, 14400, 19200,
38400, 57600, 115200, 230400, 460800, 921600
8bit, 7bit
None, Odd, Even
1-bit, 2bit
None, Hardware (RTS/CTS)
— 143 —
—
Default
9600
8bit
None
1-bit
None
-