How to save 2
To write the same PLC program in two or more devices, follow the instruction below.
1
In CODESYS development environment, open the project of the program you plan to save.
2
Select [Online] - [Create boot application] on CODESYS menu.
3
On the [Save boot application], save the program in the local disk.
4
Start the Web browser on the PC connected with the controller and enter "http://10.1.1.101/"
(the IP address of the PLC controller) in the address field.
* See "Set the Computer Network (page 15)" for connecting controller.
5
Enter password "mcb271" to log in.
6
Select [Maintenance] - [PLC Program].
7
In the Update, click the [Browse] button and select the file to upload. Then, click the [Update]
button to start uploading. From the moment the [Update] button is clicked, it takes about a
few seconds to a few tens of seconds to complete the uploading and updating. The screen
display is changed upon completion.
The uploaded PLC program is automatically executed after the rebooting the product.
—
Basic Programming
CPSN-PCB271-S1-041 Reference Manual (Software)
— 66 —
—