Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual page 30

 Channel Switching Rate
The channel switches in sequence at the set switching rate, and the value of the analog input data
register is updated. The longer the time is set, the lower the frequency noise can be removed.
The present value of the analog input data register remains until the next switching starts.
CPSN-AI-2408LI
[Setting]: Power Supply Noise Rejection (Disabled):
319 msec, 200 msec, 100 msec, 50 msec, 25 msec, 12.5 msec, 6.25 msec,
3.13 msec, 1.67 msec, 0.833 msec, 0.417 msec, 0.208 msec
Power Supply Noise Rejection (Enabled):
59.9 msec, 50 msec, 40 msec, 36.7 msec
[Default]: 40 msec
 Sensor Type
Set the sensor type.
CPSN-SSI-4C
[Setting]: Type J, Type K, Type E, Type N, Type R, Type S, Type T
[Default]: Type K
 Installation Orientation
Set the installation orientation of the product.
CPSN-SSI-4C
[Setting]: Vertical installation, Vertical installation with an angle of 90° to the right,
Vertical installation with an angle of 90° to the left, Horizontal installation
[Default]: Vertical installation
 Offset Value
Set the value to be added into the input data in order to adjust the input error.
CPSN-SSI-4C
[Setting]: -32768 to 32767
[Default]: 0
 Output Range
Set the range of voltage (current) that can output.
CPSN-AO-1602LC
[Setting]: ±10V, ±5V, 0 - 10V, 0 - 5V, 0 - 20mA
[Default]: ±10V
—
CONPROSYS nano WEB Setting
CPSN-PCB271-S1-041 Reference Manual (Software)
— 30 —
—