Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual page 139

 If your password is not recognized when you connect from
a browser on a host computer.
Both the user name and password are case-sensitive (upper and lower case letters are treated as
different). Make sure that the Caps Lock key is off and try again.
If you do not know the password of this product, you can restore the default settings by using push
switch. For details on how to operate the push switch, refer to Appendix 5 "Push Switch (SW)
(page151)".
This also initializes all other settings.
 The ping command receives a response but a "page not
found" message appears when you try to connect from a
browser.
Setup your browser as follows:
Proxy server setting
Set "do not use proxy server".
Dialup setting:
Set "do not dial".
 Product does not function correctly
Contact CONTEC to have the product examined.
—
Troubleshooting
CPSN-PCB271-S1-041 Reference Manual (Software)
CAUTION
— 139 —
—