Contec CONPROSYS nano CPSN-PCB271-S1-041 Reference Manual page 54

— —
CODESYS Installation
CPSN-PCB271-S1-041 Reference Manual (Software)
* The PLC controller must set a unique IP address that is not used by other devices on your
network. IP address of PLC controller can be set through web browser.
* Refer to "Set the Computer Network (page 15)" for detailed settings of ID address.
4
Use the ping command and confirm that PLC controller is connected with the PC.
Open Command prompt and execute ping command for IP address 10.1.1.101.
Format
ping IP address of the product
The server unit should respond if it is operating.
Enter ping 10.1.1.101, and press the [Enter] key on your keyboard.
— 54 —