Programmed Maintenance Inspection Report - Scissor Lifts - Terex Genie GS-1330m Maintenance Manual

Model
Serial number
Inspected by (print)
Programmed maintenance will be completed based on machine
hours. This program includes the onetime or commissioning
procedures for new products.
The onetime procedures will be completed at 50 or 150 hours.
If any inspection receives an "N," tag and remove the machine from service, repair and re-inspect it. After repair, place a "R" in the box.
Commissioning
50 Hour Service - all models
Perform Engine Maintenance - 50 Hours C-2
Perform 150 Hour Service
Programmed Maintenance - Under 1000 HRS
Inspect the Engine Air Filter - GS-69 RT
Grease the Steer Yokes – GS-30m, GS-30,
GS-32, GS-46, GS-55
Replace the Drive Hub Oil – GS-30, GS-32m,
GS-32, GS-46, GS-55
Engines - Deutz Under 1000 Hours
Engines - Ford Under 1000 Hours
Engines - Kohler Under 1000 Hours
Engines - Kubota Under 1000 Hours
Engines - Perkins Under 1000 Hours
Engines - GM Under 1000 Hours
Part No. 1305686GT
Programmed
Maintenance Inspection Report – Scissor Lifts
Hour meter
Inspector company
Inspector signature
50 150
C-1
∅
∅
C-3
∅
Status Enter
Hours
P0-1 40
P0-2 100
P0-3 200
P0-4
P0-5
P0-6
P0-7
P0-8
P0-9
Scissor Lifts Maintenance Manual
Legend
Y = yes, acceptable
N = no, remove from
service
R = repaired
∅ = not applicable
Programmed Maintenance
All models
Engines - all models, 1000 Hours
Replace the Drive Hub Oil - GS-69,
GS-84, GS-90
Engines - all models, 2000 Hours
Replace the Hydraulic Filters
Check the Free-wheel Configuration -
GS-84, GS-90
Check the Scissor Arm Wear Pads
(and Slider Blocks, If Equipped)
Grease the Steer Axle Wheel
Bearings - GS-69 BE, GS-69 DC
Test or Replace the Hydraulic Oil
Engines - all models, 3000 Hours
Engines – Deutz D 2.9 L4, TD 2.2 L3,
5000 Hours
Engines – Deutz D2011L03i, 6000
Hours
Date
Machine owner
Make copies of this report to use for each
inspection.
Select the appropriate procedures for the type
of inspection(s) to perform.
Hours are in thousands
Perform every: 1 2
P1-1
∅ ∅ ∅ ∅
P1-2
∅ ∅ ∅ ∅
P2-1
∅
P2-2
∅
P2-3
∅
P2-4
∅
P2-5
∅
P2-6
∅
P3-1
∅ ∅
P5-1
∅ ∅ ∅ ∅
P6-1
∅ ∅ ∅ ∅ ∅
November 2021
3 4 5 6
∅
∅
∅ ∅ ∅ ∅
∅ ∅ ∅ ∅
∅ ∅ ∅ ∅
∅ ∅ ∅ ∅
∅ ∅ ∅ ∅
∅ ∅ ∅ ∅
∅ ∅ ∅
∅
25