Maintenance Inspection Report - Terex Genie GRC-12 Service Manual

February 2022
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for
each inspection.
• Select the appropriate checklist(s) for
the type of inspection(s) to perform.
Daily or every 8 hours
Quarterly or every
250 hours
Semi-annually or
every 500 hours
Annually or A + B + C + D
every
1000 hours
Two-year or A + B + C + D + E
every
2000 hours
• Place a check in the appropriate box
after each inspection procedure is
completed.
• Use the step-by-step procedures in
this section to learn how to perform
these inspections.
• If any inspection receives an "N," tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Part No. 1314708GT
Checklist A
Perform after 50 hours:
A-1 50 Hour Service
Perform after 100 hours:
A-2 Grease steer yokes
Checklist B
B-1 Batteries
B-2 Electrical wiring
B-3 Electrical contactor
B-4 Inverter (if equipped)
B-5 Flashing beacon
B-6 Alarm package
A
B-7 Tires and wheels
A + B
B-8 Drive brakes
A + B + C
B-9 Drive speed -
stowed
B-10 Drive speed - raised
B-11 Hydraulic oil
analysis
B-12 Breather cap

Maintenance Inspection Report

Y N R
Y N R
GRC ™
Service Manual
Checklist C
C-1 Breather cap - models
with optional oil
Checklist D
D-1 Hydraulic tank return
filter
Checklist E
E-1 Hydraulic oil
Comments
Y N R
Y N R
Y N R
13