Attach The Crossrail Supports To The Rack; Mount The System To The Rack - Cisco SCE 2000 Quick Start Manual

Mount the System to the Rack

Figure 2-5
Make sure that they are oriented so that both crossrails will support the SCE 2000 when they are attached
Step 2
to the rack.

Attach the Crossrail Supports to the Rack

Step 1 Align the crossrail supports with the side of the rack, parallel to the floor.
Figure 2-6
Insert and tighten two screws to the front posts or mounting strips of the rack
Step 2
Insert and tighten two screws to the Back posts of the rack.
Step 3
Repeat steps 2 and 3 on the other side of the rack, keeping the brackets flush against the posts and
Step 4
parallel to the supporting bracket on first side of the rack.
Mount the System to the Rack
When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the
rack.
Cisco SCE 2000 4xGBE Quick Start Guide
2-4
Assembling the Slider Brackets
1 2 3
Attaching the Crossrails to the Rack
1
Chapter 2
2 3
Rack-Mount the SCE 2000
OL-7820-06