Commissioning, Inspec-Steps - Commissioning, Inspection And Maintenance - Viessmann Vitoladens 300-C Installation And Service Instructions Manual

Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
•
1. Changing the language at the control unit...................................................................... 32
• •
2. Setting the time and date (if required).............................................................................. 32
•
3. Filling the heating system................................................................................................. 32
• • •
4. Checking all connections on the heating water side for leaks
•
5. Venting the boiler............................................................................................................... 34
•
6. Venting the heating system
• •
7. Draining the heating system (if required)........................................................................ 35
•
8. Filling the trap and neutralising system (accessories) with water................................ 36
•
9. Venting the fuel oil filter and suction line........................................................................ 36
•
10. Checking the power supply
• • •
11. Function sequence and possible faults........................................................................... 37
• •
12. Removing the front panel.................................................................................................. 38
• • 13. Opening the boiler door..................................................................................................... 38
• •
14. Cleaning the heating surfaces.......................................................................................... 39
• •
15. Closing the boiler door...................................................................................................... 44
•
16. Cleaning the burner........................................................................................................... 45
•
17. Replacing the nozzle and checking or adjusting the ignition electrodes..................... 46
•
18. Mounting the burner.......................................................................................................... 46
• •
19. Cleaning and replacing the oil pump filter (if required).................................................. 47
•
20. Venting the fuel oil filter and suction line........................................................................ 47
• •
21. Checking the gaskets and thermal insulation sections................................................. 47
• • •
22. Checking the electrical connections for firm seating
• •
23. Checking the neutralising system (accessories)............................................................ 48
• •
24. Checking the activated carbon filter (accessories)........................................................ 49
• • •
25. Checking the expansion vessel and system pressure
• •
26. Adjusting the standard burner settings........................................................................... 49
• •
27. Adjusting the oil pressure and checking the vacuum.................................................... 50
• •
28. Adjusting the air volume (static burner pressure).......................................................... 51
• •
29. Fitting the front panel........................................................................................................ 52
• • •
30. Checking the safety valve function
•
31. Matching the control unit to the heating system ........................................................... 52
•
32. Adjusting the heating curves............................................................................................ 52
•
33. Connecting the control unit to WiFi................................................................................. 54
•
34. Linking the control unit to the LON.................................................................................. 54
•
35. Instructing the system user.............................................................................................. 56
•
36. Calling up and resetting the "Service" display............................................................... 56
Commissioning, inspection, maintenance
Page
31