Husqvarna R112C Workshop Manual page 49

12. Remove the main belt.
13. Install in the opposite sequence.
9.9.6 To replace the equipment belt
1. Remove the cutting deck. Refer to
cutting deck on page 9 .
2. Lift the product with a jack assembly.
3. Remove the left front wheel. Refer to
install the wheels on page 23 .
4. Remove the main belt. Refer to
belt on page 48 .
5. Remove the equipment belt from the pulley.
1342 - 002 -
To remove the
To remove and
To replace the main
6. Pull out the belt from the front of the product.
7. Install in the opposite sequence.
Repair instructions - 49