Husqvarna R112C Workshop Manual page 32

b) For R112C5 and R115C.
4. Drain the engine oil into the container.
5. Attach the drain plug and tighten it.
6. Fill with new engine oil. Refer to
page 52 .
7. Install the dipstick.
8. Let the engine become warm, then make sure that
there is no leakage from the oil drain plug.
9.2.10 To replace the air filter (R112C)
1. Open the engine cover.
2. Loosen the knobs that hold the air filter cover and
remove the cover.
32 - Repair instructions
Technical data on
3. Remove the air filter cartridge from the filter housing.
4. Install in the opposite sequence.
9.2.11 To replace the air filter (R112C5, R115C)
1. Open the engine cover.
2. Loosen the knobs that hold the air filter cover and
remove the cover.
1342 - 002 -