Husqvarna R112C Workshop Manual page 30

12. Remove the 4 screws from the engine block.
13. Remove the engine.
14. Install in the opposite sequence.
9.2.6 To remove and install the muffler (R112C)
1. Remove the engine cover. Refer to
engine cover on page 21 .
2. Remove the rear engine cover. Refer to
the rear engine cover on page 22 .
3. Remove the engine side covers. Refer to
the engine side covers R115C on page 21 .
30 - Repair instructions
4. Remove the 2 screws (A) and the heat shield (B).
x4
5. Remove the 2 screws the exhaust pipe.
6. Replace the gasket between the exhaust pipe and
7. Install in the opposite sequence.
9.2.7 To remove and install the muffler (R112C5)
1. Remove the engine cover. Refer to
2. Remove the rear engine cover. Refer to
To remove the
3. Remove the engine side covers. Refer to
To remove
To remove
B
the exhaust port.
engine cover on page 21 .
the rear engine cover on page 22 .
the engine side covers R115C on page 21 .
A
To remove the
To remove
To remove
1342 - 002 -