Husqvarna R112C Workshop Manual page 47

6. Remove the rear end of the transmission belt.
7. Remove the front end of the transmission belt.
8. Install in the opposite sequence.
9.9.4 To replace the transmission belt (R112C5)
1. Remove the engine cover. Refer to
engine cover on page 21 .
2. Remove the engine side covers. Refer to
the engine side covers R115C on page 21 .
3. Remove the fuel tank cover. Refer to
fuel tank cover on page 21 .
4. Remove the engine belt. Refer to
engine belt on page 45 .
1342 - 002 -
5. Loosen the spring for the transmission belt tensioner
6. Remove the tension pulley screw (A) and the
To remove the
To remove
7. Remove the rear end of the transmission belt.
To remove the
To replace the
with a spring hook.
tension pulley (B).
B
A
Repair instructions - 47