Ptt Call To Multiple Devices - AT&T TL87203 User Manual

Multiple handset use
Push-to-talk (PTT)

PTT call to multiple devices

When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls
when one to five handsets are registered, and a maximum of one-to-three calls
when six or more handsets are registered. The first three or four registered
handsets will be able to use this feature. Other handsets can only use PTT for
one-to-one calls.
To call multiple devices:
Using a cordless handset:
1. You have two ways to call multiple devices. When the handset is not in use:
Press and hold PUSH TO TALK until the handset shows Connecting
X
to group....
Press PUSH TO TALK. Press CID or DIR to choose Group. Press
X
SELECT
to group....
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold PUSH TO TALK when you want to speak. Speak
towards the handset. Your voice is broadcast to all devices.
3. Release PUSH TO TALK after speaking.
4. Any extension can reply (see Answer a PTT call on page 100).
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
Using the telephone base:
1. You have two ways to call multiple handsets. When the telephone base is
not in use:
Press and hold PTT until the screen shows Connecting to group....
X
Press PTT. Press CID, DIR, /RECORD, or /DELETE to choose
X
Group. Press
Connecting to group....
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold PTT when you want to speak. Speak towards
the telephone base. Your voice is broadcast to all devices.
3. Release PTT after speaking.
4. Any extension can reply (see Answer a PTT call on page 100).
NOTE: After PTT is released, the PTT call remains open for a short time. If no one presses PTT
within 10 seconds, the PTT call ends automatically.
or press PUSH TO TALK and your handset shows Connecting
SELECT or PTT and the telephone base shows
99