Answering system
Answering system settings
Call screening on/off
Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. If you turn call screening on, you hear
the incoming message. While monitoring an incoming message, you can answer
the call by pressing LINE 1/
handset, or pressing 1 LINE, 2 LINE, or SPEAKER
can also lift the corded handset to answer the incoming call.
To change the setting:
Using the telephone base:
1.
When the telephone base is in idle mode, press
to enter the main menu.
2. Press
SELECT
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Mailbox 1 or Mailbox 2, and then
press
SELECT
4. Press CID, DIR, /RECORD, or /DELETE to
highlight Ans system setup, and then press
SELECT
5. Press
6. Press CID, DIR, /RECORD, or /DELETE to choose On or Off.
SELECT
7.
Press
NOTE: For more information on call screening, see page 134.
, LINE 2/
FLASH
to select Answering system.
.
to select Call screening.
to save the setting. You hear a confirmation tone.
or /SPEAKER on a cordless
FLASH
,
on the telephone base. You
MENU
SELECT
127
ANS SYSTEM SETUP
Cal l screening
# of rings
Remote code
p
BACK
q
CALL SCREENING
On
Off
.
p
BACK
q
SELECT
SELECT