Set Date/Time - AT&T TL87203 User Manual

Telephone settings
Cordless handset and telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be correct so that the
day of the week can be calculated from the caller ID information. You can turn
off the date and time settings of a caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 58).
After power failure or handset registration, the system prompts you to set the
date and time. Follow the steps to set the month, day, year, and time.
Using a cordless handset:
To set the date and time manually:
MENU
1. Press
2. Press CID or DIR to highlight Set date/time, and then
SELECT
press
3. Press CID or DIR to choose the month, and then press
NEXT , or enter the 2-digit number using the dialing keys.
4. Press CID or DIR to choose the day, and then
press NEXT
dialing keys.
5. Press CID or DIR to choose the year, or enter the
2-digit number using the dialing keys, and then
NEXT
press
6. Press CID or DIR to choose the hour, and then press
2-digit number using the dialing keys.
Press CID or DIR to choose the minute, and then press
7.
the 2-digit number using the dialing keys.
8. Press CID or DIR to highlight AM or PM, or press 2 for AM or 7 for PM,
and then press
screen returns to the previous menu.
in idle mode to enter the main menu.
.
, or enter the 2-digit number using the
to move on to set the time.
SAVE
to confirm. You hear a confirmation tone and the
52
SET DATE
07/29/13
MM/DD/YY
BACK
SET TIME
05:41 PM
S
BACK
SAVE
, or enter the
SAVE
, or enter
K
NEXT
K
SAVE