Headset Alert Tones - AT&T TL87203 User Manual

Appendix
Screen icons, alert tones, and lights

Headset alert tones

One long beep
One short beep every
30 seconds
Two beeps
Two low beeps
Two rapid beeps every
20 seconds
Three rising beeps
Three rapid beeps
every 20 seconds
Three rapid beeps
The headset is ready to take your voice command. (You have to
install the AT&T Softphone Call Manager before using this feature.
For installation and operation instructions of the software, refer to
the Installation and Operation Guide which can be found in the
CD-ROM in the package. You may also visit
www.telephones.att.com/downloads to download it.)
The microphone is muted.
Error alert tone.
X
The ringer volume has reached its lowest setting.
X
The listening volume has reached its highest or lowest setting.
X
The speaking volume has reached its highest or lowest setting.
X
Any key is pressed while the headset is out of range.
X
Call waiting alert tone.
Low battery warning.
A conference call has started.
The headset is out of range.
X
The headset is not yet registered.
X
The headset is powering on or off.
149