Change A One-To-One Ptt Call To An Intercom Call; Answer An Incoming Call During; Ptt Call - AT&T TL87203 User Manual

Multiple handset use
Push-to-talk (PTT)

Change a one-to-one PTT call to an intercom call

You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset or the telephone base:
When your device shows Press and hold [PTT] to talk, press
1.
screen shows Switch to Intercom?.
SELECT
2. Press
The destination device briefly shows Push to talk Ended, and then
HANDSET X is calling or BASE is calling. The destination device rings.
3. Press LINE 1/FLASH, LINE 2/FLASH, or any dialing keys (0-9, or TONE )
on the destination handset, or press 1 LINE, 2 LINE, or any dialing keys (0-9,
or TONE ) on the telephone base to answer the intercom call. Both devices
now show Intercom.
4. To end the intercom call, press OFF/CANCEL or
handset, or place the cordless handset in the charger; or press
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
Using a cordless handset or the telephone base:
During a one-to-group PTT call, press LINE 1/
X
A CELL, or
CELL A , or CELL B
automatically and the outside call is answered.
During a one-to-group PTT call, press LINE 1/
X
A CELL, or
1 LINE, 2 LINE, CELL A , or CELL B
answers the outside call. The PTT call continues for the rest of the PTT
participants.
To leave the PTT call without answering the incoming call, press
X
OFF/
CANCEL
telephone continues to ring.
. Your device displays Calling BASE or Calling HANDSET X.
B CELL on the initiating handset, or press LINE 1, LINE2,
on the telephone base. The PTT call ends
B CELL on any one of the destination handsets, or press
on your handset or CANCEL on your telephone base. The
END
FLASH
FLASH
on the telephone base. That device
101
INTCOM
on your cordless
END
, LINE 2/ ,
FLASH
, LINE 2/ ,
FLASH
. The
on the