Headset Battery Installation - AT&T TL87203 User Manual

Getting started
Battery installation and charging

Headset battery installation

The headset battery is permanently attached to the battery compartment
cover. Do not try to separate them from each other. After installing the
battery, charge it for at least 15 minutes. You may be able to make and
receive short calls. For optimal performance, charge the headset battery
for at least three hours before use. When fully charged, the headset battery
provides approximately 12 hours of talk time or 5 days of standby time. When
the headset is not in use, recharge it by returning it to the headset charger.
1. Insert the battery into the battery compartment.
2. Press down on the battery until it clicks into place.
1
3. Insert the headset into the
magnetic charging mount.
NOTE: Remove any headset attachment, except the earbud, before battery replacement.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery pack or replacement headset battery pack. To
X
order a replacement battery (model BT191665/BT291665),
www.telephones.att.com
1 (866) 288-4268
2
Magnetic
charging mount
or call
.
4. The magnet holds the top
of the headset in place.
The light turns on.
visit our website at
1 (800) 222-3111
16
Charging light
. In Canada, dial