Ptt Call To Multiple Devices - AT&T CL83210 Abridged User Manual

Multiple handset use
Push-to-talk (PTT)
1. There are a few ways to begin a PTT call to a single handset. When the
telephone base is not in use:
If you have one handset, press and hold
If you have more than one handset, press
to enter the destination handset number.
2. Press and hold
3. Release
FLASH
4. To end the PTT call, press CANCEL.

PTT call to multiple devices

When there are multiple handsets registered to the phone system, PTT
will be able to use this feature. Other handsets can only use PTT for one-to-one
calls.
1. Press and hold
connection is made, both the caller and the destination parties hear a beep.
The speakerphones on all other devices automatically activate.
2. You need to press and hold PTT when you want to speak. Speak towards the
handset. Your voice is broadcast to all devices.
3. Release PTT after speaking.
4. Any device can reply (see Answer a PTT call on page 37).
1. Press and hold
When the connection is made, both the caller and the destination parties hear
a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold
towards the telephone base. Your voice is broadcast to all devices.
3. Release
FLASH
4. Any handset can reply (see Answer a PTT call on page 37).
/PTT.
FLASH
/PTT after speaking.
PTT until the handset shows Connecting to group....When the
/PTT until the screen shows Connecting to group....
FLASH
FLASH
/PTT after speaking.
/PTT.
FLASH
FLASH
/PTT when you want to speak. Speak
36
/PTT. Use the dialing keys