12.3 Operation Check
12.3.3 Checking Rotating and Moving Directions and Moving Distance
Check whether the rotating and moving directions of the motor and the moving distance are
correct. The operations can be easily confirmed using the commissioning function of the GM
Programmer without user programs.
■
Using the commissioning function
On the GM Programmer, select Project>Online Setting Mode.
Open the "Commissioning" screen for each axis to use the commissioning function.
■
Checking the rotation direction
Set the rotation direction on the servo amplifier.
Check the rotation direction by executing inching operation on the Commissioning screen.
■
Checking the moving distance
Set the moving distance on the servo amplifier.
12-8
WUME-GM1RTXSU-01