Acer AB460 F1 User Manual page 561

541
firmware image.
Management Utility
1. Enter the IP address of the switch into the address bar of your
browser and hit <E
2. On the next screen, click on the S
The window to the right shows you the current firmware version
and provides an U
3. Click on the U
socket is also included on the PCB that allows you to reinstall the
firmware with a pluggable chip.
4.
Booting using a Fallback Firmware Image:
Use the procedure below to boot using a fallback firmware image.
1. Reboot the switch by power cycling the switch power.
2. During reboot, press any key when it displays the below text (as
shown).
Hit any key to stop autoboot: 5
Accessing the Switch Firmware through the Web-based
>.
NTER
link.
PGRADE
link to update your firmware. A Rescue ROM
PGRADE
link on the list on the left.
YSTEM