304
WEBGUI Settings
Clicking the W
EB
which displays all basic Web GUI settings. The parameters for this page
are shown in the following table.
Parameter
Session timeout
Statistics Refresh
Timer
Session Privilege
Figure 4-190. Web Settings
S
link brings up the W
ETTINGS
Description
This timeout value is used to automatically logout
inactive user sessions. The default value is
(600-seconds).
The statistics pages (grouped under "Statistics" node in
left side tree) can be set to auto refresh based on this
Statistics Refresh Timer. The default value
no auto refresh by default.
This displays the current privilege level of the logged in
user. You can choose to enter another privilege level
using this configuration if you have the Enable
Password for the required privilege levels. The Enable
Passwords for different levels are configurable in the
Management Security web page.
4 Networking Switch Modules
GUI S
EB
ETTINGS
5-minutes
zero
page,
means