370
Parameter
Edge Status
Point-to-Point
Status
Hello Time
(Seconds)
Auto Edge Status
Restricted Role
Restricted TCN
VLAN Mapping
Description
This parameter must be configured if the
corresponding port is an edge port.
This parameter allows you to configure the ports
explicitly as point-to-point (
to-point port, or leave the decision to be made
dynamically (from the AL or MAC layer).
This parameter specifies the administrative value of
Hello Time for the port.
True
If set to
, the edge port status will be dynamically
calculated.
This parameter specifies the Restricted role status of
the port.
This parameter indicates the Restricted TCN status of
the port.
4 Networking Switch Modules
Force
true), as a non-point-