Acer AB460 F1 User Manual page 321

301
Clicking the IP S
TANDARD
C page, which displays the various ACL (Access Control
ONFIGURATION
List) parameters to configure the Standard IP access lists. The
parameters for this page are shown in the following table.
Parameter
ACL Number
Action
Source and
Destination IP
Address
Subnet Mask
Ports List
(Incoming)
Ports List
(Outgoing)
ACL tab brings up the IP S
Description
This parameter specifies the unique ID for the access
list. This value must be in the range from 1 to 1000.
This parameter specifies whether the packets must be
allowed or dropped when a match has been found.
This parameter specifies the IP Address of the Source
and Destination for which the access list must be
applied.
This parameter specifies the Source and Destination
Address Mask corresponding to the IP Address.
This parameter specifies the Incoming Port List for
which the access list has to be applied.
This parameter specifies the Outgoing Port List for
which the access list has to be applied.
ACL
TANDARD