Acer AB460 F1 User Manual page 286

266
Network Connection
Use the procedure below to connect and login to the Acer Smart Blade
Console.
Logging In to the Acer Smart Blade Console:
1. Connect a PC to a network that is accessible to the switch.
For example, connect a PC to any of the front panel ports of the
switch and make sure the PC has an IP address on the same subnet
as the switch management IP.
2. Type the IP address of the switch that you want to connect to in
the address bar of your browser, and hit <E
connection is made, the L
Note: The default username is root and the default password is
superuser. The Default IP address is
Address Defaults
The following are the default addresses that are initially set.
Afterwards, you can change these values within the program.
Address
Default IP Address
Default Acer Address
Default Subnet Mask
Note: If two switches are installed in a AB7000 system, you will
have to change the IP address of one from the default so that
both switches have unique addresses.
Acer Smart Blade Manager
Use the procedure below to login to the Acer Smart Blade Manager.
screen displays
OGIN
Default Setting
192.168.100.102
192.168.100.1
255.255.255.0
4 Networking Switch Modules
>. Once the
NTER
192.168.100.102
.