Acer AB460 F1 User Manual page 318

298
Parameter
Facility
Traps
Syslog Mail Configuration
Clicking the M
AIL
which allows you to configure the mail server and mail addresses for
the syslog feature. The parameters for this page are shown in the
following table.
Parameter
Mail Server IP
Address
Sender Email ID
Description
This parameter allows you to select supported facilities.
The switch supports syslog standard supported facilities
0, 1,
LOCAL LOCAL
7 and
LOCAL USER
This parameter helps you to select a particular trap
type. The following types of traps are supported
A , C
LERTS RITICIAL
I , N
NFORMATIONAL
Figure 4-186. Syslog Mail Configuration
tab brings up the S
Description
This parameter specifies the IP address of the mail
server. Make sure the mail server is reachable.
This parameter specifies the Email ID to be shown as
the From address on Syslog Emails.
4 Networking Switch Modules
2, 3,
LOCAL LOCAL LOCAL
.
, D , E
EBUGGING MERGENCIES
and W
OTIFICATION
M C
YSLOG AIL ONFIGURATION
4, 5, 6,
LOCAL LOCAL
, E ,
RROR
.
ARNINGS
page,