Bgp Filter - Acer AB460 F1 User Manual

434

BGP Filter

Clicking the F
ILTERS
which is used to set the filters on the routes being learnt. The
parameters for this page are shown in the following table.
Parameter
Filter ID
Remote AS
IP Address
IP Address Prefix
Length
Intermediate AS
Direction
tab brings up the BGP F
Description
This parameter specifies the filter index.
This parameter specifies the remote AS associated with
the BGP peer from which the router is being
distributed.
This parameter specifies the IP address for which the
route is being learnt.
This parameter specifies the prefix length to calculate
the Subnet.
This parameter represents the intermediate AS
between the BGP peers.
This parameter indicates the direction of the packet.
4 Networking Switch Modules
C
ILTER ONFIGURATION
page,