Rate Limiting - Acer AB460 F1 User Manual

346

Rate Limiting

Clicking the R
ATE
(Figure 4-223), which allows you to configure rate limiting for the port
interface. The parameters for this page are shown in the following
table.
Parameter
Port
The following parameters are configurable for Ingress Rate Limiting.
DLF Level
Broadcast Level
Multicast Level
The following parameters are configurable for Egress Rate Limiting.
Figure 4-222. Rate Limiting
L tab brings up the R
IMITING
Description
This displays the port number.
This parameter allows you to specify the destination
lookup failure packets per second.
This parameter allows you to specify the broadcast
packets per second.
This parameter allows you to specify the multicast
packets per second.
4 Networking Switch Modules
L page
ATE IMITING