Acer AB460 F1 User Manual page 333

313
SNMP Target Parameter Settings
Clicking the T
ARGET
P S
ARAMETER ETTINGS
parameters. The parameters for this page are shown in the following
table.
Parameter
Parameter Name
MP Model
Security Model
Security Name
Figure 4-197. SNMP Target Parameter Settings
P tab brings up the SNMP T
ARAMETER
page, which configures SNMP Target Address
Description
The target parameter is an unique name that specifies
SNMP target information to be used in the generation
of SNMP messages.
The Message Processing (MP) Model is used when
generating SNMP messages using this entry.
The S M
ECURITY ODEL
messages using this entry.
The S N
ECURITY AME
N , on whose behalf SNMP messages will be
AME
generated.
is used when generating SNMP
identifies the current P
ARGET
ARAMETER