Port Basic Settings - Acer AB460 F1 User Manual

341

Port Basic Settings

Clicking the B
ASIC
which allows you to configure port status and mode information. This
page also helps configuring priority and MTU. The parameters for this
page are shown in the following table.
Parameter
Port
Link status
Admin State
Default User
Priority
Switch Port
Switch Port Mode
Figure 4-218. Port Basic Settings
S tab brings up the P
ETTINGS
Description
This displays the port number.
This column shows the physical link status as an UP or
Down arrow. A green up arrow indicates that the
status of the port is up, while the red down arrow
indicates that the status of the port is down.
This parameter allows you to administratively
configure the admin state as
This parameter allows you to set the priority from
7
.
By default all ports are switch ports for layer 2
switching. To configure a port as a layer 3 routed port,
No
choose .
Use this control allows to set the access mode as either
Trunk Hybrid
or
B
ORT ASIC
Up
or
.
S page,
ETTINGS
Down
.
0
to