Igmp Static Group - Planet GSD-1020S User Manual

The page includes the following fields:
Object

VLAN ID
 Querier State
 Querier Status
 Querier Version
 Querier IP

4.7.2.3 IGMP Static Group

Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in above
sections. For certain applications that require tighter control, you may need to statically configure a multicast service on the
Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the multicast service
to that VLAN group.
- Static multicast addresses are never aged out.
- When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be
forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in
The page includes the following fields:
Object
 VLAN ID
 Group IP Address
 Member Ports
Description
Display the current VLAN ID.
Display the current querier state.
Display the current querier stauts.
Display the current querier version.
Display the current querier IP.
Figure 4-7-12
Figure 4-7-12 Add IGMP Static Group page screenshot
Description
Select VLAN ID for this drop down list.
The IP address for a specific multicast service
Select port number for this drop down list.
& Figure 4-7-13 appear.
150
User's Manual of GSD-1020S