Dos - Planet GSD-1020S User Manual

Buttons
: Click to apply changes.
The page includes the following fields:
Object
 Port Name
 Enable State
 L2 Entry Num
 Action

4.9.11 DoS

The DoS is short for Denial of Service, which is a simple but effective destructive attack on the internet. The server under DoS
attack will drop normal user data packet due to non-stop processing the attacker's data packet, leading to the denial of the
service and worse can lead to leak of sensitive data of the server.
Security feature refers to applications such as protocol check which is for protecting the server from attacks such as DoS. The
protocol check allows the user to drop matched packets based on specified conditions. The security features provide several
and reconnected on the port (by disconnecting the cable), the port will
remain shut down. There are three ways to re-open the port:
1) Disable and re-enable Limit Control on the port or the switch,
2) Click the Reopen button.

Discard: If Limit + 1 MAC addresses is seen on the port, it will trigger the
action that do not learn the new MAC and drop the package.
Figure 4-9-65 Port Security Status page screenshot
Description
The switch port number of the logical port.
Display the current per port security status
Display the current L2 entry number.
Display the current aciotn
240
User's Manual of GSD-1020S