Port To Vlan - Planet GSD-1020S User Manual

 Uplink
 TPID
Buttons
: Click to apply changes.
The page includes the following fields:
Object

Port
 Interface VLAN Mode
 PVID
 Accepted Frame Type
 Ingress Filtering
 Uplink
 TPID

4.5.6 Port to VLAN

Use the VLAN Static Table to configure port members for the selected VLAN index. This Page allows for adding and deleting
 If ingress filtering is disabled, frames classified to a VLAN that the port is not a
member of are accepted and forwarded to the switch engine.
However, the port will never transmit frames classified to VLANs that it is not a
member of.
Enable/disable uplink function in trunk port.
Configure the type (TPID) of the protocol of switch trunk port.
Figure 4-5-6 Edit Interface Setting page screenshot
Description
The switch port number of the logical port.
Display the current interface VLAN mode.
Display the current PVID.
Display the current access frame type.
Display the current ingress filtering.
Display the current uplink mode.
Display the current TPID.
105
User's Manual of GSD-1020S