The page includes the following fields:
Object
Session ID
Monitor Session State
Destination Port
Allow-ingress
Sniffer TX Ports
Sniffer RX Ports
Buttons
: Click to apply changes.
The page includes the following fields:
Figure 4-3-9 Port Mirroring Settings page screenshot
Description
Set the port mirror session ID. Possible ID are: 1 to 4.
Enable or disable the port mirroring function.
Select the port to mirror destination port.
Frames from ports that have either source (rx) or destination (tx) mirroring enabled are
mirrored to this port.
Frames transmitted from these ports are mirrored to the mirroring port. Frames received
are not mirrored.
Frames received at these ports are mirrored to the mirroring port. Frames transmitted are
not mirrored.
Figure 4-3-10 Mirroring Status page screenshot
75
User's Manual of GSD-1020S