Igmp Static Group - Planet IGS-4215-16T2S User Manual

The page includes the following fields:
Object
•
VLAN ID
• Querier State
• Querier Status
• Querier Version
• Querier IP

4.8.3 IGMP Static Group

Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in above
sections. For certain applications that require tighter control, you may need to statically configure a multicast service on the
Industrial Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the
multicast service to that VLAN group.
- Static multicast addresses are never aged out.
- When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be
forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in
The page includes the following fields:
Object
• VLAN ID
• Group IP Address
• Member Ports
Buttons
: Click to add IGMP router port entry.
Description
Displays the current VLAN ID.
Displays the current querier state.
Displays the current querier status.
Displays the current querier version.
Displays the current querier IP.
Figure 4-8-10
Figure 4-8-10: Add IGMP Static Group Page Screenshot
Description
Select VLAN ID for this drop-down list.
The IP address for a specific multicast service.
Select port number for this drop-down list.
184
User's Manual of IGS-4215-16T2S
and Figure 4-8-11 appear.