3Ware 9650SE-2LPB-10 User Manual page 8

viii
Table 1: Chapters and Appendices in this Guide
Chapter/Appendix
3. First-Time RAID Configuration
Using 3BM
4. Driver Installation
5. 3ware BIOS Manager (3BM)
6. 3ware Disk Manager 2
(3DM 2)
7. Configuring Your Controller
8. Configuring Units
9. Maintaining Units
10. Maintaining Your Controller
11. 3DM 2 Reference
12. Troubleshooting
A. Glossary
B. Compliance and Conformity
Statements
C. Warranty, Technical Support,
and Service
Description
Provides step-by-step instructions for
configuring RAID units if you have just installed
the controller.
Describes how to install drivers for the 3ware
controller if you have just installed and
configured it. Includes information for Windows,
Linux, and FreeBSD.
Describes the basics of using 3BM.
Describes the basics of using 3DM. Also
includes information about installing and
uninstalling 3DM, and how to start the 3DM
process manually, if required.
Describes how to view details about the
controller, check its status, and change
configuration settings that affect the controller
and all associated drives.
Describes how to configure new units and hot
spares, change existing configurations, and set
unit policies.
Describes how to check unit and drive status,
review alarms and errors, schedule background
maintenance tasks, and manually start them,
when necessary or desirable. Includes
explanations of initialization, verify, rebuild, and
self-tests.
Describes how to update the driver, move a unit
from one controller to another, and replace an
existing 3ware controller with a new one. Also
includes information about checking battery
status on a BBU (Battery Backup Unit).
Describes the features and functions on each
of the pages in 3DM.
Provides common problems and solutions, and
explains error messages.
Includes definitions for terms used throughout
this guide.
Provides compliance and conformity statement.
Provides warranty information and tells you
how to contact technical support.
3ware Serial ATA RAID Controller User Guide