3Ware 9650SE-2LPB-10 User Manual page 190

Chapter 10. Maintaining Your Controller
180
18 When the Completing the Hardware Update Wizard screen appears,
click Finish.
19 If you are prompted to restart the system, do so.
Shortly after clicking Finish, or after the machine reboots, the first screen
of the Hardware Update Wizard appears again, informing you that
Windows has found new hardware.
If you are using Windows XP Service Pack 2, the screen asks whether you
want to connect to Windows Update (Figure 84).
Figure 84. Found New Hardware Screen
20 Choose "No, not this time" and click Next.
At the next screen, leave the selection as "Install the software
automatically." Click Next and follow the prompts on the screen.
21 When the second Completing the Found New Hardware screen
appears, click Finish.
3ware Serial ATA RAID Controller User Guide