3Ware 9650SE-2LPB-10 User Manual page 113

www.3ware.com
2 After all drives for the unit are selected,
and press Enter .
Tip:
You can also press
3 On the 3ware Disk Array
listed.
Figure 50. Create Disk Array Display
4 (Optional) Press Enter
again to set the name.
5 to the
Tab RAID Configuration
available configurations for the number of drives you selected.
Figure 51. Configuration Choices for Four Drives
6 Use the
arrow keys
7 to the field
Tab Stripe Size
256 KB).
Figure 52. Stripe Sizes for a RAID 5
Tab
Alt-C
to choose Create Unit.
screen, make sure that the proper drives are
and type a name for the unit; then press
field and press
to select the configuration you want and press
and select the desired striping size (16, 64, or
Configuring a New Unit
to the button
Create Unit
Enter
to display a list of
Enter
Enter
.
103