3Ware 9650SE-2LPB-10 User Manual page 72

Chapter 5. 3ware BIOS Manager 2 (3BM 2) Introduction
62
Table 7: Working in 3BM 2
To do this
Specify (or unspecify) a drive as a hot
spare
Return to starting values for this session
in the 3ware BIOS Manager
Rescan the controller and update the
status of units and drives
Return to the main 3ware BIOS Manager
screen, from the Advanced Details
screen
Move a highlighted unit up or down in the
list of exportable units
(The top-most unit will become the
bootable unit, if you install the OS.)
Display context sensitive help
If you have multiple 3ware controllers in
your system, return to the board selection
screen.
Exit the utility and save or abandon all
changes.
Exit the utility and save all changes
Use these keys
S
F6
Note:
F6 cannot bring back previous
policy settings; they are saved when
you exit the Policy screen.
Alt+R
Any key
Page Up
Page Down
(Available only when there are
multiple units and a unit is
highlighted.)
F1 or Alt-F1
Esc
Esc
F8
3ware Serial ATA RAID Controller User Guide