3Ware 9650SE-2LPB-10 User Manual page 110

Chapter 8. Configuring Units
100
3 Click .
Create Unit
A window similar to the one below shows the drives you selected, and
lets you specify configuration settings.
Figure 46. Configuring a Unit in 3DM
4 In the field, select the RAID configuration you want.
Type
5 If stripe size applies to the RAID type you select, select a
(Stripe size does not apply to RAID 1.)
6 Optional: In the Name
including dashes and underscores).
7 If you have 12 drives attached to the controller and selected RAID 50 as
the configuration in step 3, select whether you want 3, 4, or 6 Drives Per
Subunit, as shown here.
Figure 47. Configuring a RAID 50 with 12 Drives
box, enter a name for the unit (up to 21 characters,
3ware Serial ATA RAID Controller User Guide
.
Stripe Size