Figure 38. Found New Hardware Wizard.
Reboot the machine
Log in as system administrator when you reboot the system. You
should see a brief splash screen (see Figure 36), followed immedi-
ately by an "Installation Complete" notification (see Figure 37).
Continue with the following steps to make any new disk arrays or
independent disks accessible to Windows 2000 or XP.
1 Remove the driver diskette, then select Yes to restart the system.
The system may not boot if you don't remove the diskette.
2 Partition and format the new arrays or disks using Disk Admin-
istrator:
a Choose Administrative Tools from the Start menu.
b Choose Computer Management from the Administrative
Tools menu.
www.3ware.com
Windows® 2000 or Windows XP Installation
83