Install The Driver Via A Command Shell - 3Ware 3W-6800 User Manual

3 When the Type of Installation display appears, do not select
anything yet.
4 Insert the 3ware driver installation diskette, then press Ctl-Alt-
F2.

Install the driver via a command shell

Note:
installing (i.e. su64, su72, etc.). Check 3ware's website for
supported versions.
1 From the command prompt, issue the following commands:
/ # mount -t msdos /dev/fd0 /mnt
/ # cp /mnt/***/3w-xxxx.o /modules
/ # umount /mnt
2 Eject the 3ware Software Installation diskette from the floppy
drive and issue the following commands.
/ # cd /modules
/modules # /sbin/insmod 3w-xxxx.o
3 Press Ctl-Alt-F1 to return to the Type of Installation display.
Note:
loaded, stop the driver with the command below and
repeat step 3 to load the current driver:
/modules # /sbin/rmmod 3w-xxxx
4 Select Abort-No Installation.
www.3ware.com
*** refers to the SuSE Linux version you are
If the system reports a 3ware module is already
Linux Installation
109