Figure 35. Installation Complete Notification
Remove the existing Escalade Storage Switch and install
the new Escalade Storage Switch
Refer to the Hardware Installation chapter.
Reboot the machine
1 If you choose to reconfigure your disk arrays, press Alt-3 to
bring up the Disk Array Configuration Utility.
2 If you reconfigure your disk arrays, partition and format any
new disk arrays or freed disks. To partition, run fdisk by select-
ing Run... from the Start menu and typing fdisk in the Run
window.
3 To format, restart the system again and log in. Select the device
with the right mouse button in the My Computer window and
select Format... from the popup menu.
4 After formatting, reboot the system again to avoid running an
incompatible DOS mode and low performance.
www.3ware.com
Windows® 98/ME Installation
75