3ware Escalade Storage Switch User Guide
Figure 26. Install Driver
Remove the existing Escalade Storage Switch and install
the new Escalade Storage Switch
Refer to the Hardware Installation chapter.
Reboot the machine
1 Remove the driver diskette from your PC, then restart your sys-
tem. If you don't remove the diskette, the system may not boot.
2 If you choose to reconfigure your disk arrays, press Alt-3 to
bring up the Disk Array Configuration Utility.
3 Log in at the administrator level and wait for the system to
reboot. You should see a brief splash screen (see Figure 21) fol-
lowed immediately by an "Installation Complete" notification
(see Figure 22).
58
www.3ware.com