Replacing An Existing Storage Switch; Update The 3Ware Driver - 3Ware 3W-6800 User Manual

Replacing an existing storage switch with a
new version of the switch
Caution:
age Switch) for the new version Escalade Storage
Switch before installing the switch. Your system may
not boot with the new version of the storage switch
unless the new version of the driver has been installed
first.
Note:
age Switch does not require reconfiguring the drives
connected to your switch and will not affect data stored
in your disk arrays for this and previous versions.
Materials required:
• 3ware Windows driver installation diskette
• 3ware CD-ROM

Update the 3ware driver

1 Backup any critical data prior to upgrading the 3ware driver.
See "Update the 3ware driver" on page 54.
2 Log in to your system.
3 Go to the Start menu, click on Settings and open the Control
Panel window.
4 Click on the System icon from the Control Panel window.
5 Click on the Device Manager tab.
6 Open the SCSI Adapters selection.
7 Locate and double-click on 3ware Storage Switch. The 3ware
Storage Switch Properties pop-up menu appears.
www.3ware.com
Install the correct driver (Escalade 7000 Stor-
Upgrading to a new version of the Escalade Stor-
Windows® 98/ME Installation
69